Kayan aikin Granulator na Biyu Roller Extrusion

Kayan aikin Granulator na Biyu Roller Extrusion na'ura ce ta musamman da ake amfani da ita don fitar da albarkatun graphite zuwa siffar granular.Waɗannan na'urori yawanci sun ƙunshi na'urar fitarwa, tsarin ciyarwa, tsarin sarrafa matsa lamba, tsarin sanyaya, da tsarin sarrafawa.
Fasaloli da ayyuka na kayan aikin Granulator na Biyu Roller Extrusion sun haɗa da:
1. Extruder: Extruder shine ainihin ɓangaren kayan aiki kuma yawanci ya haɗa da ɗakin matsa lamba, tsarin matsa lamba, da ɗakin extrusion.Wurin matsa lamba yana ba da isasshen sarari don riƙe albarkatun graphite da amfani da matsa lamba, yayin da injin matsi yana ba da matsin lamba ta hanyar inji ko na'ura mai aiki da karfin ruwa don fitar da kayan cikin nau'in granular.
2. Tsarin ciyarwa: Ana amfani da tsarin ciyarwa don jigilar kayan albarkatun graphite a cikin ɗakin matsa lamba na extruder.Tsarin ciyarwa yawanci ya ƙunshi tsarin dunƙulewa, bel mai ɗaukar kaya, ko wata hanyar isar da saƙo don samun ci gaba da kwanciyar hankali.
3. Tsarin kula da matsa lamba: Ana amfani da tsarin kula da matsa lamba don sarrafawa da daidaita matsa lamba ta hanyar extruder.Yawanci ya haɗa da na'urori masu auna matsa lamba, matsa lamba masu sarrafa bawuloli, da masu kula da matsa lamba don tabbatar da cewa tsarin extrusion yana faruwa a cikin kewayon da ya dace.
4. Tsarin sanyaya: Zafin da aka haifar a lokacin aikin extrusion yana buƙatar sanyaya don hana graphite barbashi daga overheating ko kafa matalauta Tsarin.Tsarin sanyaya yawanci ya haɗa da tsarin samar da ruwa don sanyaya ruwa ko iskar gas don tabbatar da sarrafa zafin jiki yayin aiwatar da extrusion.
5. Tsarin sarrafawa: Ana amfani da tsarin sarrafawa don saka idanu da sarrafa sigogi daban-daban yayin aiwatar da extrusion.Yawanci ya ƙunshi PLC (mai sarrafa dabaru na shirye-shirye) ko DCS (tsarin sarrafawa da aka rarraba) don cimma sarrafawa ta atomatik da saka idanu na bayanai.https://www.yz-mac.com/roll-extrusion-compound-fertilizer-granulator-product/